Leaf Clamp LEDs Calibration

new version of CaliQ LED output calibration using PAR matching…

qpar matching 1 testing CaliQ step 4 Calibrate LOWER PAR LEDs

Warning

This calibration requires a CaliQ

2279

Basic Usage

Example: Import statement for the leaf_clamp_leds_calibration protocol

## Import leaf_clamp_leds_calibration
from jii_multispeq_protocols.protocols.calibrations import leaf_clamp_leds_calibration as _leaf_clamp_leds_calibration

---

Sequence

        %%{
init: {
  "theme": "base",
  "themeVariables": {"primaryColor": "#49e06d", "primaryTextColor": "#005e5e", "primaryBorderColor": "#005e5e", "lineColor": "#fff381", "secondaryColor": "#afd7f4", "tertiaryColor": "#D7EBF9"}
}
}%%
flowchart LR
     START((Start))
     A0["`**cal_led_7**`"]:::protocol
     START ==> A0
     A0 ==> END
     A0 -.-> |1x| A0
     linkStyle 2 stroke-width:3px
     END(( End ))
     classDef protocol text-align:left,white-space:pre;
    

---

Details

Code

Protocol Code

[  {  '_protocol_set_': [  {  'label': 'cal_led_7',
                              'protocol_repeats': '#l1',
                              'qpar_led_cal': [7, '@p1', '@p2', 20]}],
      'set_repeats': 1,
      'v_arrays': [[6000], [25, 600, 3000], [600, 3000, 6000]]}]

---

Analysis

Usage

Analysis Example (requires JII-MultispeQ package)

from jii_multispeq import measurement as _measurement
from jii_multispeq_protocols.protocols.calibrations import leaf_clamp_leds_calibration as _leaf_clamp_leds_calibration

## Take a measurement using the MultispeQ
data, crc32 = _measurement.measure(port="<Selected Port>", protocol=_leaf_clamp_leds_calibration, filename=None, notes="")

## The analyze function of JII-MultispeQ helps to provide the correct format
output = _measurement.analyze( data, _leaf_clamp_leds_calibration._analyze )

## View Analysis output (as table)
_measurement.view( output )

Function Details

_analyze(_data)

• Macro for data evaluation on PhotosynQ.org

• by: David M. Kramer

• created: July 17, 2020 10:10 AM

Example Data

Parameter	Value
device_battery	101
device_firmware	2.3432
device_id	41:00:08:6b
device_name	MultispeQ
device_version	2
max_allowed_par	[6000]
max_setpoint_for_led:0	2310.0
r2_cal_led_7:0	0.996
r2_cal_led_7:1	0.999
r2_cal_led_7:2	0.9978
time	1598118193361
toDevice	par_to_dac_lin+7+85.0+148.0+210.0+335.0+584.0+1330.0+2310.0+2310.0+par_max_setting+7+2310.0+